|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DISCRETE SEMICONDUCTORS DATA SHEET M3D744 PMEG1020EV Ultra low VF MEGA Schottky barrier rectifier Product data sheet 2003 Jul 15 NXP Semiconductors Product data sheet Ultra low VF MEGA Schottky barrier rectifier FEATURES * Forward current: 2 A * Reverse voltage: 10 V * Ultra low forward voltage * Ultra small plastic SMD package. APPLICATIONS * Low voltage rectification * High efficiency DC/DC conversion * Switch mode power supply * Inverse polarity protection * Low power consumption applications. handbook, halfpage 6 PMEG1020EV PINNING PIN 1 2 3 4 5 6 DESCRIPTION cathode cathode anode anode cathode cathode 5 4 DESCRIPTION Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifier with an integrated guard ring for stress protection encapsulated in a SOT666 ultra small plastic SMD package. 1, 2 5, 6 3, 4 MHC310 1 2 3 Marking code: F2. Fig.1 Simplified outline (SOT666) and symbol. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VR IF IFRM IFSM Tstg Tj Tamb Note 1. Only valid if pins 3 and 4 are connected in parallel. PARAMETER continuous reverse voltage continuous forward current repetitive peak forward current non-repetitive peak forward current storage temperature junction temperature operating ambient temperature Tsp 55 C; note 1 tp 1 ms; 0.5; note 1 tp = 8 ms square wave; note 1 CONDITIONS - - - - -65 - -65 MIN. 2 3.2 9 +150 150 +150 MAX. 10 V A A A C C C UNIT 2003 Jul 15 2 NXP Semiconductors Product data sheet Ultra low VF MEGA Schottky barrier rectifier ELECTRICAL CHARACTERISTICS Tamb = 25 C unless otherwise specified. SYMBOL VF PARAMETER forward voltage CONDITIONS see Fig.2; note 1 IF = 0.01 A IF = 0.1 A IF = 1 A IF = 2 A IR reverse current see Fig.3 note 2 VR = 5 V VR = 8 V VR = 10 V Cd Notes 1. Pulse test: tp = 300 s; = 0.02. diode capacitance VR = 5 V; f = 1 MHz; see Fig.4 0.7 1 1.2 37 100 164 255 306 PMEG1020EV TYP. MAX. 130 200 350 460 2 2.5 3 45 UNIT mV mV mV mV mA mA mA pF 2. For Schottky barrier rectifiers thermal runaway has to be considered, as in some applications the reverse power losses (PR) are a significant part of the total power losses. THERMAL CHARACTERISTICS SYMBOL Rth j-a Rth j-s Notes 1. Refer to SOT666 standard mounting conditions. 2. Device mounted on a printed-circuit board, single-sided copper, tinplated, mounting pad for cathode 1 cm2. 3. Solder point of cathode tabs. Soldering Reflow soldering is the only recommended soldering method. PARAMETER thermal resistance from junction to ambient thermal resistance from junction to solder point note 1 note 2 note 3 CONDITIONS VALUE 405 215 80 UNIT K/W K/W K/W 2003 Jul 15 3 NXP Semiconductors Product data sheet Ultra low VF MEGA Schottky barrier rectifier GRAPHICAL DATA MDB591 PMEG1020EV 104 handbook, halfpage IF (mA) 103 105 handbook, halfpage IR (A) (1) MDB195 104 103 102 (1) (2) (3) (2) 102 10 10 (3) 1 0 100 200 300 400 500 VF (mV) 1 0 2 4 6 8 10 VR (V) (1) Tamb = 85 C. (2) Tamb = 25 C. (3) Tamb = -40 C. (1) Tamb = 85 C. (2) Tamb = 25 C. (3) Tamb = -40 C. Fig.2 Forward current as a function of forward voltage; typical values. Fig.3 Reverse current as a function of reverse voltage; typical values. handbook, halfpage 120 MDB196 Cd (pF) 100 80 60 40 20 0 2 4 6 8 VR (V) 10 f = 1 MHz; Tamb = 25 C. Fig.4 Diode capacitance as a function of reverse voltage; typical values. 2003 Jul 15 4 NXP Semiconductors Product data sheet Ultra low VF MEGA Schottky barrier rectifier PACKAGE OUTLINE PMEG1020EV Plastic surface mounted package; 6 leads SOT666 D A E X S YS HE 6 5 4 pin 1 index A 1 e1 e 2 bp 3 wMA Lp detail X c 0 1 scale 2 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 0.6 0.5 bp 0.27 0.17 c 0.18 0.08 D 1.7 1.5 E 1.3 1.1 e 1.0 e1 0.5 HE 1.7 1.5 Lp 0.3 0.1 w 0.1 y 0.1 OUTLINE VERSION SOT666 REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 01-01-04 01-08-27 2003 Jul 15 5 NXP Semiconductors Product data sheet Ultra low VF MEGA Schottky barrier rectifier DATA SHEET STATUS DOCUMENT STATUS(1) Objective data sheet Preliminary data sheet Product data sheet Notes PRODUCT STATUS(2) Development Qualification Production DEFINITION PMEG1020EV This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification. 1. Please consult the most recently issued document before initiating or completing a design. 2. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. DISCLAIMERS General Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. 2003 Jul 15 6 NXP Semiconductors Customer notification This data sheet was changed to reflect the new company name NXP Semiconductors. No changes were made to the content, except for the legal definitions and disclaimers. Contact information For additional information please visit: http://www.nxp.com For sales offices addresses send e-mail to: salesaddresses@nxp.com (c) NXP B.V. 2009 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613514/01/pp7 Date of release: 2003 Jul 15 Document order number: 9397 750 11686 |
Price & Availability of PMEG1020EV |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |